Risk Management in the Manufacturing Production Process: Integration of Automation Technology and Machine Safety
DOI:
https://doi.org/10.55642/phasij.v4i02.884Keywords:
Automation technology, machine safety, risk managementAbstract
This study explores the integration of automation technology and machine safety in risk management within the manufacturing production process. By employing a combination of qualitative and quantitative methods, including literature reviews, surveys, and data analysis, the research identifies the critical role of automation technologies such as robotics, IoT, and predictive analytics in mitigating risks. These innovations improve operational efficiency, enhance worker safety, and ensure compliance with evolving regulatory standards. Key findings highlight the dual benefits of reducing downtime and preventing workplace accidents, while also emphasizing the necessity of adaptive risk management strategies. The study concludes that aligning advanced technologies with proactive safety protocols fosters a more resilient and productive manufacturing environment.
References
Abbas, A., Prayitno, P., Nurkim, N., Prumanto, D., Dewadi, F. M., Hidayati, N., & Windarto, A. P. (2021). Implementation of clustering unsupervised learning using K-Means mapping techniques. IOP Conference Series: Materials Science and Engineering, 1088(1), 012004.
Alfaris, L., Dewadi, F., Maryadi, Kurniawan, E., Ulum, M., Zulaikha, D., Indriyani, Harahap, R., Sari, T., Yani, A., Santoso, A., & Indrayana, I. (2022). Termodinamika (R. Pido (ed.)). PT. Indie Press.
Darmayani, S., Tribakti, I., Bulkis Musa, Satriawan, D., Rustiah, W., Helilusiatiningsih, N., Sahabuddin, E. S., Rivandi Pranandita Putra, Rahmawati, Fathan Mubina dewadi, & Cundaningsih, N. (2023). Kimia Lingkungan (M. Sari (ed.)). PT. GET Press Indonesia.
Dewadi, F., & Amir. (2021). Machine Drawing Module. Guepedia. https://doi.org/10.1049/sqj.1935.0084
Dewadi, F. M. (2022). Klasifikasi Perpindahan Panas. In R. Pido (Ed.), Perpindahan Panas: Dasar dan Praktisi dari Perspektif Akademisi dan Praktisi (pp. 1–8). Indie Press.
Dewadi, F. M. (2023). Pemanasan BBM Kombinasi dengan Tolak Ukur Pemanasan Temperatur dengan Variabel Densitas, Viskositas serta Flash Point. Praxis: Jurnal Sains, Teknologi, Masyarakat Dan Jejaring, 5(3).
Dewadi, F. M., & Abduh Al-Afgani. (2021). Implementasi Material Titanium Pada Sepeda Listrik Sebagai Rangka Yang Efisien. In Research Gate. https://www.researchgate.net/publication/371172279_Implementasi_Material_Titanium_pada_Sepeda_Listrik_sebagai_Rangka_yang_Efisien#fullTextFileContent
Dewadi, F. M., Farahdiansari, A. P., Rochyani, N., Suprihatin, H., Botutihe, S., Oktavera, R., Rachman, D. N., Yuliawati, E., Suprayitno, A., & Umar, U. (2023). EKONOMI TEKNIK. Get Press Indonesia.
Dewadi, F. M., Milasari, L. A., A, H., Wibowo, C., Suprayitno, A., Alfaris, L., Saputra, A. A., & Gobel, F. F. (2023). Desain Penelitian Bidang Teknik (EC00202380965).
Dewadi, F. M., Supriyadi, S., Sulaiman, A. R. P., & Ulhakim, M. T. (2024). Evaluation of Science Implementation in Mechanical Engineering Design Curriculum Class 2A State Polytechnic of Jakarta Pekalongan City Campus Academic Year 2023/2024. Engineering and Technology International Journal, 6(02), 56–64.
Dewadi, F., Simatupang, D., Nugraha, M., & Rafdi, M. (2016). Sepeda Listrik dengan Isi Ulang Mandiri.
Khoirudin, K., Murtalim, M., Sukarman, S., Dewadi, F. M., Rahdiana, N., Raais, A., Abdulah, A., Anwar, C., & Abbas, A. (2021). Mechanical Engineering for Society and Industry A Report on Metal Forming Technology Transfer from Expert to Industry for Improving Production Efficiency.
Kusmiwardhana, D., Dewadi, F. M., Wijaya, M. M., Muzakki, I., Simanullang, F., & Tsabitha, N. B. (2024). PEMANFAATAN HIDROFOBIK PADA SERAT RAMI TERHADAP HIGIENITAS MATERIAL KAIN DI KAMPUS PNJ PSDKU PEKALONGAN. Jurnal Pengabdian Masyarakat: Pemberdayaan, Inovasi Dan Perubahan, 4(2).
Mustafa, Nugroho, B. S., Dewadi, F. M., Putera, D. A., Dermawan, A. A., Maharja, R., Sunuh, H. S., Saharudin, Panggeleng, A. M. F., Gala, S., Subagyo, I., Hasanudin, & Syam, D. M. (2023). HAKI Keselamatan Kerja dan Lingkungan Industri (EC00202335600).
Nanda, R. A., & Dewadi, F. M. (2024). Optimization of Production Processes through Lean Manufacturing Techniques in the Automotive Industry. Engineering and Technology International Journal, 06(02), 58–65. https://www.mand-ycmm.org/index.php/eatij/article/view/795
Nanda, R. A., Dewadi, F. M., Ramadhan, M. F., & Akmal, K. K. (2024). Pelatihan Penggunaan Alat Ukur Voltmeter Untuk mengukur Tegangan Dan Arus Solar Panel di Pesantren AT-Taubah. Jurnal Pengabdian Masyarakat Mandiri (JPMM), 2(02), 215–224.
Nugroho, B. S., Dewadi, F. M., Putera, D. A., Dermawan, A. A., Maharja, R., Sunuh, H. S., Panggeleng, A. M. F., & Gala, S. (2023). Keselamatan Kerja dan Lingkungan Industri (M. Sari (ed.)). PT. GET Press Indonesia. https://books.google.co.id/books?id=7Ly9EAAAQBAJ
Ratnadewi, Randjawali, E., Zahriah, Zulkarnaini, Rusdi, Wibowo, R., Tuada, rasydah N., Nurlina, Lutfin, N. A., & Dewadi, F. M. (2023). Fisika Optik Umum dan Mata (N. Sulung (ed.)). PT. GET Press Indonesia.
Surbakti, D., Wibowo, C., & Dewadi, F. M. (2022). Perbaikan gerobak sampah sebagai bagian dari manajemen sampah sisi hulu di lingkungan Permata Penggilingan Jakarta. Indonesian Journal of Engagement, Community Services, Empowerment and Development, 165–174.
Wibowo, C., Dewadi, F. M., & Setiawan, D. (2024). Pembuatan Compressed Natural Gas (CNG) Pressure Reduction System (PRS) Kapasitas 15 NM3/H. Engineering and Technology International Journal, 6(01), 14–21.
Wibowo, C., Mubina Dewadi, F., & Setiawan, D. (2024). PEMBUATAN COMPRESSED NATURAL GAS (CNG) PRESSURE REDUCTION SYSTEM (PRS) KAPASITAS 15 NM3/H. Engineering And Technology International Journal Maret, 6(1), 2714–2755. https://doi.org/10.556442
Yunus, A. I., Kristiana, R., Dewadi, F. M., Anwar, B., H.Umar, S. A., Fuadah, N., Sarasanty, D., Edahwati, L., Murdani, E., & Tukimun. (2023). Mekanika Teknik II (D. P. Sari (ed.)). PT. GET Press Indonesia.
Yusaerah, N., Jumiaty, H., Dewadi, F. M., Rustiah, W., Faisal, A. P., Amin, I. I., Hutami, T. A., Darmayani, S., & Helilusiatiningsih, N. (2022). Konsep Dasar Kimia Analitik. In W. N. Ramadhani (Ed.), Konsep Dasar Kimia Analitik. PT. GET Press Indonesia. https://books.google.co.id/books?hl=id&lr=&id=q-ajEAAAQBAJ&oi=fnd&pg=PA63&dq=titrasi+pengendapan&ots=K8t-T4Xbem&sig=afUWKI5IUJK…1/1
