Design, Development, and Performance Evaluation of a Closed-System Batik Fabric Drying Machine for Small-Scale Industry Applications
DOI:
https://doi.org/10.55642/eatij.v7i03.1156Keywords:
Batik fabric dryer, closed-loop drying, thermal control, small-scale industry, energy efficiencyAbstract
This study presents the design and performance evaluation of a closed-system batik fabric drying machine for small-scale industries. The system integrates a spinner for initial dewatering and a hot-air blower with thermostatic control at 60 °C. Experimental tests examined drying time, temperature stability, and fabric quality. Results showed that 2 kg of batik fabric dried in 18 minutes—about 70 % faster than traditional sun drying. The closed-loop air circulation improved thermal uniformity (±1.5 °C deviation) and reduced energy use by 25 %. No color fading or fiber damage occurred, and ultraviolet lamps prevented microbial growth. This design demonstrates that combining mechanical efficiency, thermal control, and ergonomics can enhance energy efficiency and production reliability for micro-scale batik industries.
Downloads
References
Ameen, A., & Bari, S. (2004). Investigation into the effectiveness of heat pump assisted clothes
dryer for humid tropics. Energy Conversion and Management, 45(9–10), 1397–1405.
Bobbo, S., Lombardo, G., Menegazzo, D., Vallese, L., & Fedele, L. (2024). A technological update on heat pumps for industrial applications. Energies, 17(19), 4942.
Cao, X., Zhang, J., Li, Z. Y., Shao, L. L., & Zhang, C. L. (2021). Process simulation and analysis of a closed-loop heat pump clothes dryer. Applied Thermal Engineering, 199, 117545.
Choudhury, A. K. R. (2017). Principles of textile finishing. Woodhead Publishing.
Goli, S., Saha, S. K., & Agrawal, A. (2023). Assessment of first law performance characteristics and Chilton–Colburn analogy in diamond and hourglass microchannels. Applied Thermal Engineering, 223, 120017.
Hakim, L. M. (2018). Batik sebagai warisan budaya bangsa dan nation brand Indonesia. Nation State: Journal of International Studies, 1(1), 61–90.
Kaveh, M., Abbaspour-Gilandeh, Y., & Chen, G. (2020). Drying kinetic, quality, energy and exergy performance of hot air-rotary drum drying of green peas using adaptive neuro-fuzzy inference system. Food and Bioproducts Processing, 124, 168–183.
Kurniati, K. (2021). The learning effectiveness of women’s fashion making practice with the up. Prosiding Internasional, 1–6.
Lee, J., Cho, J., & Lee, S. (2025). Comparative study on the drying mechanisms and characteristic changes of fabrics according to heat transfer principles. Fashion and Textiles, 12(1), 1.
Lei, Z., O’Neill, T., & Langrish, T. (2024). The application of pinch technology to a novel closed-loop spray drying system with a condenser and reheater. Entropy, 26(9), 809.
Mandal, S., Chowdhury, I. Z., Mazumder, N.-U.-S., Agnew, R. J., & Boorady, L. M. (2022). Characterization of sweat drying performance of single-layered thermal protective fabrics used in high-risk sector workers’ clothing. Polymers, 14(24), 5393. https://doi.org/10.3390/polym14245393
Martuti, N. K. T., Hidayah, I., Margunani, M., & Alafima, R. B. (2020). Organic material for clean production in the batik industry: A case study of natural batik Semarang, Indonesia. Recycling, 5(4), 28.
Mavridis, S., & Voudrias, E. A. (2021). Using biogas from municipal solid waste for energy production: Comparison between anaerobic digestion and sanitary landfilling. Energy Conversion and Management, 247, 114613.
Nursanti, I., McKay, A., & Chittenden, R. (2022, July). An approach for the assessment of water use in batik production processes. In IFIP International Conference on Product Lifecycle Management (pp. 683–692). Springer Nature Switzerland.
Nursanti, I., McKay, A., & Chittenden, R. (2025). An approach for integrating water use assessment into the design processes of the Indonesian batik industry. International Journal of Sustainable Engineering, 18(1), 2489492.
Obanoyen, O. N., & Akinola, A. O. (2023). Design and fabrication of a cloth dryer. Global Journal of Engineering and Technology Advances, 14(1), 33–38.
Rahman, R. Z., Nuryanto, F., Tjiptady, B. C., & Putra, A. D. (2022). Rancang bangun desain mesin pencacah pakan sapi berbasis software Autodesk Inventor. Metrotech (Journal of Mechanical and Electrical Technology), 1(3), 97–101.
Rahayu, I. A. T., & Peng, L. H. (2020, January). Sustainable batik production: Review and research framework. In International Conference on Research and Academic Community Services (ICRACOS 2019) (pp. 66–72). Atlantis Press.
Rembulan, G. D., Wijaya, T., Ruslie, A., Jordy, J., & Sunadynatha, R. A. S. (2020). Mereduksi voice of customer pada pengembangan produk alat pembuka tutup galon menggunakan analisis faktor. Journal of Industrial Engineering and Management Systems, 13(2), 77–86.
Shimpy, Kumar, M., & Kumar, A. (2024). Design and optimization of a domestic solar dryer: An analytical approach. Engineering Computations, 41(4), 947–965.
Suherman, I. K., Sudirman, S., Wibolo, A., Wibawa, I. W. S., & Adiaksa, I. M. A. (2023). Performance evaluation of rotary dryer for drying of ginger. Journal of Engineering and Applied Research, 8(3), 115–124.*
Susana, I. G. B., & Putra, I. K. P. (2025). Design of dryer for small farmers based on the study of ergonomics thermal engineering application. Jurnal Pendidikan Teknik Mesin, 25(1), 8–14.
Trixie, A. A. (2020). Filosofi motif batik sebagai identitas bangsa Indonesia. Folio, 1(1), 1–9.
Wangi, R. R., & Poernomo, D. (2019). Pelaksanaan proses produksi pada usaha kecil batik Pringgokusumo Banyuwangi. E-SOSPOL: Electronical Journal of Social and Political Sciences, 6(1), 55–63.
Wardana, C., Kuncoroadi, R. T., Pramudya, A. G., & Rahayu, S. (2020). Penerapan alat pengering batik dengan memanfaatkan kalor tungku pelorotan guna meningkatkan efisiensi produksi sebagai antisipasi cuaca yang tidak menentu. Journal of Applied Mechanical Engineering, 5(2), 44–52.
Wu, S., Zhang, Z., Han, Y., Ren, K., & Kong, L. (2025). An experimental investigation on the effect of different ultrasonic powers and temperatures on convective drying of fabric. Journal of Energy Research and Reviews, 17(8), 55–63.
